During tempering (toughening) process immeadiate and excessive heating and cooling treatment applies on the glass therefore high compressive stresses are set up at the surfaces with balancing tensile stresses in the center.

Toughening process makes the glass durable and stronger against external impacts and  the exposure of thermal stress. As an example, tempered glass can be durable up to 300 degree heat exposure while annealed glass could be broken at 40 degree heat exposure.  That makes tempered glass 5 times more durable than annealed glass.                                                                                                    

 Tempered glass also can be used as safety glass since it breaks into small, blunt edged pieces, that could be helpful for reducing the injury risk.

In our facility Heat Soak Test application is also possible under the standart of EN14179. Therefore,  the risk of spontaneous breakages could be reduced due to Heat Soak Test.

Yüklü Cam is qualified according to EN12150 standart on tempering production, and meet the requirements for  EN1863 standard on heat strengthed production.

Possible Dimensions

Thickness (mm)         Size (mm)

3mm                          1000 * 2000

4mm                          2400 * 2500

5 mm                         2400 * 5000

6  mm                        2400 * 5000

8  mm                        2400 * 5000

10 mm                       2400 * 5000

12 mm                       2400 * 5000

15 mm                       10 m2

19 mm                        8 m2

Minimum Size: 300 * 300 mm (for each thickness)